Search Results for “talkgroups” – Page 5 – PNWDigital

Talkgroup Deck

Repeaters and MMDVM servers are programmed with their own set of talkgroups, which comprises the "talkgroup deck". This deck is also matched to the codeplugs that are generated by ACB…

How Can I Tell Which Talk Groups Are Full Time And Which Are Part Time?

See the Talkgroups Matrix. Find your district and repeater. When you click on your repeater, you will see a column titled “Rule.” This column indicates if the Talkgroup is full…

What is the Significance of the Numbers 1 and 2 Attached to the End of a Talkgroup Label?

Number 1 designates timeslot 1 and Number 2 designates timeslot 2. It helpful to know which timeslot you are operating on so 1 and 2 are attached to the Labels. (e.g.,…

Is It Ok to ‘Kerchunk’ a Talkgroup?

Yes. In fact, you must Kerchunk part-time talkgroups to be able to listen in to them. Please read this post by NO7RF for more details.

What is the RT Systems Programmer

RTS is a nifty radio programming tool to use to maintain codeplugs. RTS can program many DMR different radios. RTS has been around for many years, and it is well…

Brandmeister Network Issues

PNWDigital is not part of Brandmeister. We have very different settings in our codeplugs. It's probable that your settings won't fully work on our network if you've programmed for BM…

Digital Monitor — Promiscuous Mode — RX-Scan Groups

If you have an interest in listening to activity on a repeater, there are levels of listening at the client radio level as well as on the desired repeater (or…

Scan with Rx Groups – Better

Motorola's MotoTRBO radios (and other DMR client radios) have a limit of 15 channels (modes) in each scan list. There is also a limit of 15 group call (Talkgroup) ID's…