The 6D PNWDigital Starter codeplug has a sampler of repeaters in WA, OR and ID as well as some analog simplex.  This plug has the basic settings coded for the PNWDigital network.  Use this plug, not the factory default unless you are an experienced user and coder of PNWD codeplugs.

If you are provided a PNWD coded Cootie 6D radio as a demo or giveaway, this is what you will get unless we code additional zones for you individually.

              -------------------------------------------------------------------------------

3-21-23:  Added MMDVM zone - 433.0125, TS 2, Low Power, 1 Rx group channel for digital monitor
               Appears that the C006D pro ht is no longer listed on Amazon at $31 or any price.  
               Still recommended not to buy the 01 or 04 at any price.
              -------------------------------------------------------------------------------

The channels are primarily Parrot and PNW Regional 2 (31771).  This is to allow for radio testing without assistance as well as a live talkgroup.

Scan and RX groups are included for all repeaters in the State Zones.

RX groups are active on all state zoned repeaters.  As there is no digital monitor in the Cooties, you can listen to all traffic on a repeater on that selected time slot.  If you want to listen to both timeslots, then turn on Scan.

All Channels are set to low power.  VHF and UHF work well but you need to use a dual-band antenna with a deep-reach SMA connector.  Possibly triming off the rubber at the base of the antenna will allow the needed depth.

The suggestion is to adopt this codeplug and then add zones for repeaters of interest to you, using this starter as you base to code from.

The button Assignments:
Side Button 1 Short: Scan On/Off Toggle
Side Button 1 Long:  Monito (Analog Only)
Side Button 2 Short: High/Low Power (Toggle)
Side Button 2 Long:  Repeater/Talkaround (Toggle Simplex on the output or repeater enabled)